Chamber Systems
We offer a variety of different types of chambers:
- SC-310 Chamber
- SC-740 Chamber
- MC-3500 Chamber
- MC-4500 Chamber
Chamber systems are met with technical approval all over the Globe, f. ex.:
- DIBt – Certified by German Centre of Competence for Construction
- Polish National Technical Assessment – Road and Bridge Research Institute IBDiM-KOT-2017/0049 1st Edition
Chamber systems are designed to be used as:
- infiltration systems,
- retention systems,
- culverts under the roads, or pavements,
- ground heat exchangers,
- linear drain system receivers.
SC-310 Chamber
The SC-310 Chamber is an ideal solution for employing/utilizing rain water and treated wastewater, especially on sites with difficult land-water conditions.
Chamber systems built using SC-310 chambers are designed to maximise the area of water retention, which is necessary on lands characterised with low permeability (clay soils).
Due to the small height of the chamber (41 cm), it can be easily installed in conditions where the water table is set up high, on the level of 1.20 m b.g.l. in green areas, and on the level of 1.50m b.g.l. in the building areas.
Specifications:
- height – 0.41 m
width – 0.86 m
length – 2.30 m (installation – 2.17 m) - capacity – 0.9-1.2 m3
- weight – 17 kg
- material – polipropylen
- durability – 14.5 ton/car axis
SC-740 Chamber
The SC-740 Chamber is a universal solution that provides good conditions of water retention that will be ideal to fit into the system on small building land.
One SC-740 Chamber takes approximately 2.8 m2 of space in the system, simultaneously collecting 2.6 m3 of rain water.
Specifications:
- height – 0.76 m
width – 1.30 m
length – 2.30 m (installation – 2.17 m) - capacity – 2.12-2.60 m3
- weight – 34 kg
- material – polipropylen
- durability – 14.5 ton/car axis
MC-3500 Chamber
MC-3500 Chamber is an ideal solution if the system is needed to be of big capacity, on a small space.
MC-3500 Chamber can gather about 8.3 m 3 of rain water while taking the only 4.3 m2 of the area.
Specifications:
- height – 1,14 m
width – 1,96 m
length – 2,30 m (installation – 2,17 m) - capacity – 5,01-5,43 m3
- capacity cover – 1,29-1,43 m3
- weight – 56 kg
- material – polipropylen
- durability – 14.5 ton/car axis
MC-4500 Chamber
MC-4500 Chamber is the newest addition to the Chambers Systems family.
The chamber was designed for small spaces, with the demand for big capacity.
MC-4500 can store up to 11.6 m3 of rain water, whilst taking only 7.5 m2 of space.
- Specifications:
height – 1,51 m
width – 2,54 m
length – 1,32 m (installation – 1,23 m) - capacity – 4,60-4,91 m3
- capacity cover – 3,08-3,35 m3
- weight – 54 kg
- material – polipropylen
- durability – 14.5 ton/car axis
